TECHNICAL DATA SHEET
SWINE
Introduction
MMi was developed, through the use of Nanotechnology, to reduce moisture contamination of feed. Moisture contamination is responsible for the development of harmful molds, bacteria and fungus.
Product Description
A light-brown, dense powder.
Sold in 50-pound bags.
Ingredients
Dried Yeast, Montmorillonite Clay, Diatomaceous Earth, Dried Seaweed Meal.
All ingredients are classified as GRAS (Generally Regarded As Safe).
When should MMi Be Used?
Moisture changes constantly within batches of grain due to a variety of environmental conditions during growing, harvesting and storage.
Even grains that appear dry and clean can contain pockets of moisture.
How Fast Will MMi Work?
The adsorption of the moisture by MMi will happen immediately upon contact.
Feeding Rates for SWINE
| Gestation |
2.2 lb (1 kg)/ton |
| Farrowing |
4.4 lb (2 kg)/ton |
| Nursery |
3.3 lb (1.5 kg)/ton |
| Finishing |
1.1 lb (0.5 kg)/ton |
These are recommended levels, but inclusion rates should be adjusted based on the contamination level of the feed.
Maximum inclusion rate is 2% of total feed intake.
Application
MMi should be thoroughly mixed into the feed to insure even distribution.
MMi can also be used as a top dress.
Benefits
The reduction of potential mold, pathogenic bacteria and fungus leads to a safer feed. |
